Four-Wire Crossover Cable Rj45 Pinouts For 10/100Base-Tx; Four-Wire Straight-Through Cable Rj45 Pinouts For 10/100Base-Tx - Enterasys SecureStack C2 C2G124-48P Hardware Installation Manual

d. Ensure that the twisted pair connection meets the dB loss and cable specifications
outlined in the Cabling Guide. Refer to "Related Documents" on page xvi for
information on obtaining this document.
5. If a link is not established or there is no PoE power, contact Enterasys Networks. Refer
to "Getting Help" on page 1‐7 for details.
Repeat all steps above until all connections have been made.
Figure 3-14

Four-Wire Crossover Cable RJ45 Pinouts for 10/100BASE-TX

Ã
1 RJ45 switch port
2 Other device port
Figure 3-15

Four-Wire Straight-Through Cable RJ45 Pinouts for 10/100BASE-TX

Ã
1 RJ45 switch port
2 Other device port
À
Â
3 RJ45-to-RJ45 crossover cable
4 RX+/RX- and TX+/TX-connections
These connections must share a common color pair.
À
Â
3 RJ45-to-RJ45 straight-through cable
4 RX+/RX- and TX+/TX-connections
These connections must share a common color pair.
Connecting to the Network
Á
Á
SecureStack C2 Installation Guide 3-23