Command Groups; Table 4-4. Command Group Index - Enterasys Matrix-V V2H124-24 Configuration Manual

4
Command Line Interface
Keystroke
Ctrl-F
Ctrl-K
Ctrl-L
Ctrl-N
Ctrl-P
Ctrl-R
Ctrl-U
Ctrl-W
Esc-B
Esc-D
Esc-F
Delete key or backspace key

Command Groups

The system commands can be broken down into the functional groups shown below
Command Group
Line
General
System Management
Flash/File
Cabletron Discovery
Protocol
Power over Ethernet
Authentication
Access Control Lists
SNMP
Interface
Mirror Port
4-8
Table 4-3. Keystroke Commands (Continued)
Function
Shifts cursor to the right one character.
Deletes all characters from the cursor to the end of the line.
Repeats current command line on a new line.
Enters the next command line in the history buffer.
Enters the last command.
Repeats current command line on a new line.
Deletes from the cursor to the beginning of the line.
Deletes the last word typed.
Moves the cursor back one word.
Deletes from the cursor to the end of the word.
Moves the cursor forward one word.
Erases a mistake when entering a command.

Table 4-4. Command Group Index

Description
Sets communication parameters for the serial port and Telnet,
including baud rate and console time-out
Basic commands for entering privileged access mode, restarting the
system, or quitting the CLI
Controls system logs, system passwords, user name, browser
management options, and a variety of other system information
Manages code image or switch configuration files
The Cabletron Discovery Protocol (CDP) protocol enables a switch to
discover the topology of other CDP-aware devices in the network.
Configures power output for connect devices
Configures RADIUS and TACACS+ client-server authentication for
logon access and commands for IEEE 802.1x port access control.
Provides filtering for IP frames (based on address, protocol, TCP/
UDP port number or TCP control code) or non-IP frames (based on
MAC address or Ethernet type)
Activates authentication failure traps; configures community access
strings, and trap managers; also configures IP address filtering
Configures the connection parameters for all Ethernet ports,
aggregated links, and VLANs
Mirrors data to another port for analysis without affecting the data
passing through or the performance of the monitored port
.
Page
4-10
4-19
4-24
4-66
4-72
4-79
4-84
4-110
4-137
4-150
4-161