Ip Default-Gateway; Ip Dhcp Restart - Enterasys Matrix-V V2H124-24 Configuration Manual

Related Commands

ip dhcp restart (4-235)

ip default-gateway

Use this command to a establish a static route between this device and
management stations that exist on another network segment. Use the no form to
remove the static route.
Syntax
ip default-gateway gateway
no ip default-gateway
gateway - IP address of the default gateway
Default Setting
No static route is established.
Command Mode
Global Configuration
Command Usage
A gateway must be defined if the management station is located in a different
IP segment.
Example
The following example defines a default gateway for this device:
Console(config)#ip default-gateway 10.1.0.254
Console(config)#
Related Commands
show ip redirects (4-236)
ip dhcp restart
Use this command to submit a BOOTP or DCHP client request.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• This command issues a BOOTP or DHCP client request for any IP interface
that has been set to BOOTP or DHCP mode via the ip address command.
• DHCP requires the server to reassign the client's last address if available.
• If the BOOTP or DHCP server has been moved to a different domain, the
IP Interface Commands
4-235
4