Figure 3-105. Changing Priorities Based On Acl Rules - Enterasys Matrix-V V2H124-24 Configuration Manual

3
Configuring the Switch
Web – Click Priority, ACL Marker. Select a port and an ACL rule. To specify a ToS
priority, mark the Precedence/DSCP check box, select Precedence or DSCP from
the scroll-down box, and enter a priority. To specify an 802.1p priority, mark the
802.1p Priority check box, and enter a priority. Then click Add.

Figure 3-105. Changing Priorities Based on ACL Rules

CLI – This example changes the DSCP priority for packets matching an IP ACL rule,
and the 802.1p priority for packets matching a MAC ACL rule.
Console(config)#interface ethernet 1/1
Console(config-if)#match access-list ip bill set dscp 0
Console(config-if)#match access-list mac mike set priority 0
Console(config-if)#end
Console#show marking
Interface ethernet 1/1
match access-list IP bill set DSCP 0
match access-list MAC a set priority 0
Console#
3-170
4-151
4-124
4-134
4-125