Deleting Line Items - Enterasys SmartSwitch 2200 Management Supplement

VLAN Classification Configuration Screen
7. In some cases, a selection in the subclassification field requires a user defined value to be entered
in a third field to the right of the subclassification field. If so, use the arrow keys to highlight that
third field. Otherwise, go to
8. Type in the appropriate value.
9. Use the arrow keys to highlight the ADD command field.
10.Press ENTER to save the VID and Classification settings. After a brief delay, the VID,
Classification, and Description will display in the top half of the screen.
2.3.4

Deleting Line Items

All, or one or more, line items can be deleted as follows:
Deleting All Line Items
To delete all the configured VID/Classification/Description line items, use the arrow keys to
highlight the DEL ALL command field and press ENTER.
Deleting One or More Line Items
To delete one or more entries, mark each entry and then delete them, as follows:
1. Use the arrow keys to highlight a line to be deleted.
2. Press the M key and an asterisk (*) appears next to the highlighted line to mark it. The DEL ALL
command is changed to DEL MARKED.
3. If more than one line item is to be deleted, repeat
NOTE: If for some reason you want to remove a mark, perform
Pressing M when a marked line is highlighted will remove the mark. If all marks are
removed, the DEL MARKED command is changed back to DEL ALL.
4. After the lines are marked, use the arrow keys to highlight the DEL MARKED command field.
5. Press ENTER. The marked line items are deleted.
2-12 Local Management Screens
step 9.
step 1 and step 2 to mark each line.
step 1 and step 2
.