Authentic Radius Server - D-Link xStack DGS-3200-10 User Manual

xStack

Authentic RADIUS Server

The RADIUS featu re o f the Switch allows th e u ser to facilitate centralized u ser administration as wel l as p roviding p rotection
against a sniffing, active hacker. The Web manager offers three windows.
To view the following window, click Security > 802.1X > Authentic RADIUS Server:
This window displays the following information:
Parameter
Index
IP Address
Authentic Port (1-
65535)
Accounting Port (1-
65535)
Timeout (1-255)
Retransmit (1-255)
Key (Max. length 32
bytes)
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 5 - 31. Authentic RADIUS Server window
Description
Choose the desired RADIUS server to configure: 1, 2 or 3 and select either IPv4 Address
or IPv6 Address.
Set the RADIUS server IP address.
Set the RADIUS authentic server(s) UDP port which is used to transmit RADIUS data
between the Switch and the RADIUS server. The default port is 1812.
Set the RADIUS account server(s) UDP port which is used to transmit RADIUS accounting
statistics between the Switch and the RADIUS server. The default port is 1813.
Set the RADIUS server age-out, in seconds.
Set the RADIUS server retransmit time, in seconds.
Set the key the same as that of the RADIUS server.
145