xStack
The following fields can be set in the VLAN Batch Settings windows:
Parameter
VID List (e.g. 2-5)
Advertisement
Port List (e.g. 1-5)
Tagged
Untagged
Forbidden
Click Apply to implement changes made.
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 3 - 9. VLAN Batch Settings tab of the 802.1Q VLAN window
Description
Enter a VLAN ID List that can be added, deleted or configured.
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Allows an individual port list to be added or deleted as a member of the VLAN.
Specifies the port as 802.1Q tagged. Use the drop-down menu to designate the port as
tagged.
Specifies the port as 802.1Q untagged. Use the drop-down menu to designate the port as
untagged.
Specifies the port as not being a member of the VLAN and that the port is forbidden from
becoming a member of the VLAN dynamically. Use the drop-down menu to designate the port
as forbidden.
NOTE: The Switch supports up to 4k static VLAN entries.
70