Radius; Authentication Radius Server Settings; Radius Accounting Settings - D-Link xStack DES-3200 Series Reference Manual

RADIUS

Authentication RADIUS Server Settings

The RADIUS feature of the Switch allows the user to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker.
To view this window, click Security > RADIUS > Authentication RADIUS Server Settings as shown below:
The fields that can be configured are described below:
Parameter
Index
Server IP
Authentication Port (1-
65535)
Accounting Port (1-65535)
Timeout (1-255)
Retransmit (1-20)
Key
Confirm Key
Click the Apply button to accept the changes made.

RADIUS Accounting Settings

Users can configure the state of the specified RADIUS accounting service.
To view this window, click Security > RADIUS > RADIUS Accounting Settings as shown below:
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 8-22 Authentication RADIUS Server Settings window
Description
Choose the desired RADIUS server to configure: 1, 2 or 3.
Set the RADIUS server IP address.
Set the RADIUS authentic server(s) UDP port which is used to transmit
RADIUS data between the Switch and the RADIUS server. The default port is
1812.
Set the RADIUS account server(s) UDP port which is used to transmit RADIUS
accounting statistics between the Switch and the RADIUS server. The default
port is 1813.
Set the RADIUS server age-out, in seconds.
Set the RADIUS server retransmit time, in times.
Set the key the same as that of the RADIUS server.
Confirm the key the same as that of the RADIUS server.
184