Firmware Upgrade; Configuration File Backup/Restore; Upload Log File - D-Link xStack DGS-3200-10 User Manual

®
xStack DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

Firmware Upgrade

The Commander Switch may be used for firmware upgrades of member switches. Member Switches will be listed in the table and
will be specified by Port (port o n the CS wh ere the MS resides), MAC Address, Model Nam e and Version. To specify a certain
Switch for firmware download, click its corresponding check box under the Port heading. To update the firmware, enter the Server
IP Address where the firmware resides and enter the Path/Filename of the firmware. Click Download to initiate the file transfer.
To view the following window, click Configuration > Single IP Management > Firmware Upgrade:
Figure 2 - 66. Firmware Upgrade window for Single IP Management

Configuration File Backup/Restore

The Commander Switch can instruct configuration file backup and restore to the Mem ber Switch using a TFTP server. Mem ber
Switches will be listed in the ta ble and will b e specified by Port (port on the CS where the MS resi des), MAC Address, Model
Name and Version. To sp ecify a cer tain Switch for upgrading configuration files, click its corresponding radio button under the
Port heading. To update the configuration file, enter the Server IP Address where the file resides and enter the Pat h/Filename of
the configuration file. Click Restore to initiate the file tran sfer from a TFTP serv er to the Switch. Click Backup to backup the
configuration file to a TFTP server.
To view the following window, click Configuration > Single IP Management > Configuration File Backup/Restore:
Figure 2 - 67. Configuration File Backup/Restore window for Single IP Management

Upload Log File

The Commander Switch can order a log file from a member switch sent to a server. Provide the Server IP address for storing the
log and the log file path and filename on the member switch. Click Upload to send the log file to a TFTP server.
To view the following window, click Configuration > Single IP Management > Upload Log File:
Figure 2 - 68. Upload Log File window for Single IP Management
58