Port Utilization - D-Link xStack DGS-3200-10 User Manual

xStack

Port Utilization

Users can display the percentage of the total available bandwidth being used on the port.
To view the following window, click Monitoring > Port Utilization:
To select a port to view these statistics for, select the port by using the Port drop-down menu. The user may also use the real-time
graphic of the Switch at the top of the web page by simply clicking on a port.
Change the view parameters as follows:
Parameter
Port
Time Interval
Record Number
Show/Hide
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7 - 5. Port Utilization window
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value
is 200.
Check whether or not to display Port Util.
215