Ssh Authmode And Algorithm Settings - D-Link xStack DGS-3200-10 User Manual

xStack

SSH Authmode and Algorithm Settings

Users can c onfigure t he desired t ypes of SSH al gorithms used for a uthentication e ncryption. The re are three c ategories of
algorithms l isted a nd speci fic al gorithms o f eac h m ay be ena bled or disabled by t icking t heir c orresponding c heck b oxes. All
algorithms are enabled by default.
To view the following window, click Security > SSH > SSH Authmode and Algorithm Settings:
The following algorithms may be set:
Parameter
Password
Public Key
Host Based
3DES-CBC
Blow-fish CBC
AES128-CBC
AES192-CBC
AES256-CBC
ARC4
Cast128-CBC
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 5 - 34. SSH Authmode and Algorithm Settings window
Description
SSH Authentication Mode Settings
This may be enabled or disabled to choose if the administrator wishes to use a locally
configured password for authentication on the Switch. This parameter is enabled by
default.
This may be enabled or disabled to choose if the administrator wishes to use a public key
configuration set on a SSH server, for authentication. This parameter is enabled by
default.
This may be enabled or disabled to choose if the administrator wishes to use a host
computer for authentication. This parameter is intended for Linux users requiring SSH
authentication techniques and the host computer is running the Linux operating system
with a SSH program previously installed. This parameter is enabled by default.
Encryption Algorithm
Use the check box to enable or disable the Triple Data Encryption Standard encryption
algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Blowfish encryption algorithm with Cipher
Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES128
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES192
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES-256
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Arcfour encryption algorithm with Cipher
Block Chaining. The default is enabled.
Use the check box to enable or disable the Cast128 encryption algorithm with Cipher
Block Chaining. The default is enabled.
150