DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
RADIUS Server
The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing protection against
a sniffing, active hacker. The Web Manager offers three windows.
Click Security > 802.1X > RADIUS Server to open the Authentic RADIUS Server Setting window shown below:
Figure 10- 22. Authentic RADIUS Server and Current RADIUS Server Settings Table window
This window displays the following information:
Parameter
Succession
Choose the desired RADIUS server to configure: First, Second or Third.
RADIUS Server
Set the RADIUS server IP.
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Authentic Port
Accounting Port
Set the RADIUS account server(s) UDP port. The default port is 1813.
Key
Set the key the same as that of the RADIUS server.
Confirm Key
Confirm the shared key is the same as that of the RADIUS server.
Status
This allows you to set the RADIUS Server as Valid (Enabled) or Invalid (Disabled).
Click Apply to implement changes made.
Description
132