Authorization Network State Settings; Multiple Authentication Settings - D-Link xStack DGS-3200-10 User Manual

xStack
This mode adds an ex tra layer of security by ch ecking the IP MAC-Binding Port Binding (IMPB) table b efore trying one of the
supported aut hentication m ethods. The IMPB Ta ble is used to create a 'wh ite-list' that checks if t he IP stream s being se nt by
authorized hosts ha ve been granted o r n ot. I n t he ab ove di agram, th e Switch port has been con figured to allow clien ts to
authenticate using either WAC or JWAC. If the client is in the IMPB table and tries to connect to the network using either of these
supported authentication methods and the client is listed in the white list for leg al IP/MAC/port checking, access will be granted.
If a client fails one of the authentication methods, access will be denied.
The Multiple Authentication folder contains three windows: Authorization Network State Settings , Multiple Authentication
Settings, and Guest VLAN Settings.

Authorization Network State Settings

Users can configure Authorization Network State Settings for the Switch.
To view the following window, click Security > Multiple Authentication > Authorization Network State Settings:

Multiple Authentication Settings

Users can configure multiple authentication methods for a port or ports.
To view the following window, click Security > Multiple Authentication > Multiple Authentication Settings:
To set up multiple authentication settings on individual ports for the Switch, complete the following fields:
Parameter
From Port
To Port
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 5 - 60. Authorization Network State Settings window
Figure 5 - 61. Multiple Authentication Settings window
Description
Use this drop-down menu to select the beginning port of a range of ports to be enabled as
multiple authentication ports.
Use this drop-down menu to select the ending port of a range of ports to be enabled as
multiple authentication ports.
177