Snmp Community Table - D-Link xStack DGS-3200-10 User Manual

xStack

SNMP Community Table

Users can create an SNMP community string to define the relationship between the SNMP manager and an agent. The community
string acts like a password to permit access to the a gent on the Switch. One or m ore of the fo llowing c haracteristics can be
associated with the community string:
 An Access List of IP addresses of SNMP managers that a re permitted to use the c ommunity string to gain access to the
Switch's SNMP agent.
 Any MIB view that defines the subset of all MIB objects will be accessible to the SNMP community.
 Read/write or read-only level permission for the MIB objects accessible to the SNMP community.
To view the following window, click SNMP Settings > Configuration > SNMP Community Table:
The following parameters can set:
Parameter Description
Community Name Type an alphanumeric string of up to 32 characters that is used to identify members of an
SNMP community. This string is used like a password to give remote SNMP managers access
to MIB objects in the Switch's SNMP agent.
View Name Type an alphanumeric string of up to 32 characters that is used to identify the group of MIB
objects that a remote SNMP manager is allowed to access on the Switch. The view name must
exist in the SNMP View Table.
Access Right Read Only – Specifies that SNMP community members using the community string created
can only read the contents of the MIBs on the Switch.
Read Write – Specifies that SNMP community members using the community string created
can read from, and write to the contents of the MIBs on the Switch.
To im plement th e n ew setti ngs, click Apply. To d elete an en try from th e SN MP Co mmunity T able, click th e Delete b utton
corresponding to the entry to delete.
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 2 - 44. SNMP Community Table window
44