D-Link xStack DGS-3200-10 User Manual page 242

xStack
ServerPortNumber
RoundTripTime
Requests
Retransmissions
Responses
MalformedResponses
BadAuthenticators
PendingRequests
Timeouts
UnknownTypes
PacketsDropped
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
The UDP port the client is using to send requests to this server.
The time interval between the most recent Accounting-Response and the
Accounting-Request that matched it from this RADIUS accounting server.
The number of RADIUS Accounting-Request packets sent. This does not include
retransmissions.
The number of RADIUS Accounting-Request packets retransmitted to this RADIUS
accounting server. Retransmissions include retries where the Identifier and Acct-
Delay have been updated, as well as those in which they remain the same.
The number of RADIUS packets received on the accounting port from this server.
The number of malformed RADIUS Accounting-Response packets received from
this server. Malformed packets include packets with an invalid length. Bad
authenticators and unknown types are not included as malformed accounting
responses.
The number of RADIUS Accounting-Response packets, which contained invalid
authenticators, received from this server.
The number of RADIUS Accounting-Request packets sent to this server that have
not yet timed out or received a response. This variable is incremented when an
Accounting-Request is sent and decremented due to receipt of an Accounting-
Response, a timeout or a retransmission.
The number of accounting timeouts to this server. After a timeout the client may
retry to the same server, send to a different server, or give up. A retry to the same
server is counted as a retransmit as well as a timeout. A send to a different server is
counted as an Accounting-Request as well as a timeout.
The number of RADIUS packets of unknown type which were received from this
server on the accounting port.
The number of RADIUS packets, which were received from this server on the
accounting port and dropped for some other reason.
229