®
xStack
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
IMPB Port Settings
Users can configure IMPB settings on a port basis.
Select a port or a range of ports with the From Port and To Port fields. Enable or disable the port with Strict or Loose State, enable
or disable Allow Zero IP and Forward DHCP Packet fields, and configure the port's Max IMPB entry.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > IMPB Port Settings, as shown below:
Figure 5 - 7. IMPB Port Settings window
126