Transmitted (Tx) - D-Link xStack DGS-3200-10 User Manual

xStack
The following fields may be set or viewed:
Parameter
Port
Time Interval
Record Number
Unicast
Multicast
Broadcast
Show/Hide
Clear
View Table
View Graphic

Transmitted (TX)

To select a port to view these statistics for, select the port by using the Port drop-down menu. The user may also use the real-time
graphic of the Switch at the top of the web page by simply clicking on a port.
To view the following windows, click Monitoring > Packets > Transmitted (TX):
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Counts the total number of good packets that were received by a unicast address.
Counts the total number of good packets that were received by a multicast address.
Counts the total number of good packets that were received by a broadcast address.
Check whether or not to display Multicast, Broadcast, and Unicast Packets.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Clicking this button instructs the Switch to display a line graph rather than a table.
Figure 7 - 12. Transmitted (TX) window (for Bytes and Packets)
221