Forwarding & Filtering; Unicast Forwarding; Multicast Forwarding - D-Link xStack DGS-3200-10 User Manual

xStack
Forwarding & Filtering
The Forwarding & Filtering folder con tains th ree windows: Unicast Forw arding, Multica st Forwarding, and Multicast
Filtering Mode.

Unicast Forwarding

Users can set up unicast forwarding on the Switch.
To view the following window, click L2 Features > Forwarding & Filtering > Unicast Forwarding:
To add an entry to the Static Unicast Forwarding Table, define the following parameters. To modify an entry on the Static Unicast
Forwarding Table, click the Edit button correspo nding to th e en try. To delete an en try in the Static Un icast Forwarding Tab le,
click the corresponding Delete button.
Parameter
VLAN ID (VID)
MAC Address
Port
Click Apply to implement the changes made.

Multicast Forwarding

Users can set up multicast forwarding on the Switch.
To view the following window, click L2 Features > Forwarding & Filtering > Multicast Forwarding:
This window displays all of the entries made into the Switch's static multicast forwarding table. The following parameters can be
set:
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 3 - 49. Unicast Forwarding window
Description
The VLAN ID number of the VLAN on which the associated unicast MAC address resides.
The MAC address to which packets will be statically forwarded. This must be a unicast MAC
address.
Allows the selection of the port number on which the MAC address entered above resides.
Figure 3 - 50. Multicast Forwarding window
111