D-Link xStack DGS-3200-10 User Manual page 291

xStack
linkDown
linkUp
authenticationFailure
newRoot
topologyChange
PowerFailure
PowerRecover
FanFailure
FanRecover
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
A linkDown trap signifies that the
sending protocol entity recognizes a
failure in one of the communication
links represented in the agent's
configuration.
A linkUp trap signifies that the
sending protocol entity recognizes
that one of the communication links
represented
configuration has come up.
An authenticationFailure
signifies that the sending protocol
entity is the address of a protocol
message that
authenticated.While implementations
of the SNMP must be capable of
generating this trap, they must also
be capable
emission of such traps via an
implementation- specific mechanism.
The newRoot trap indicates that the
sending agent has become the new
root of the Spanning Tree; the trap is
sent by a bridge soon after its
election as the new root, e.g., upon
action of the Topology Change Timer
immediately
election. Implementation of this trap
is optional.
A topologyChange trap is sent by a
bridge when any of its configured
ports transitions from the Learning
state to the Forwarding state, or from
the Forwarding state to the Blocking
state. The trap is not sent if a
newRoot trap is sent for the same
transition. Implementation of this
trap is optional.
The PowerFailure trap indicates that
at least one power supply has failed.
The PowerRecover trap indicates
that the failed power has recovered.
The FanFailure trap indicates that at
least one of the fans has failed.
The FanRecover trap indicates that a
failed fan has recovered.
1.3.6.1.6.3.1.1.5.3
1.3.6.1.6.3.1.1.5.4
in the agent's
trap 1.3.6.1.6.3.1.1.5.5
is not properly
of suppressing the
1.3.6.1.2.1.17.0.1
subsequent to its
1.3.6.1.2.1.17.0.2
1.3.6.1.4.1.171.12.11.2.2.2.0.2
1.3.6.1.4.1.171.12.11.2.2.2.0.3
1.3.6.1.4.1.171.12.11.2.2.2.0.1
1.3.6.1.4.1.171.12.11.2.2.3.0.2
278