Authentication Server Group - D-Link xStack DGS-3200-10 User Manual

xStack
The following parameters can be set:
Parameter
Application
Login Method List
Enable Method List
Click Apply to implement changes made.

Authentication Server Group

Users ca n se t u p A uthentication Server G roups on t he S witch. A se rver group i s a t echnique used t o group
TACACS/XTACACS/TACACS+/RADIUS server ho sts in to user-defined catego ries for au thentication using m ethod lists. Th e
user m ay d efine th e typ e of serv er gro up by p rotocol or b y p reviously d efined serv er group . Th e Switch has three b uilt-in
Authentication Server Groups that cannot be removed but can be modified. Up to eight authentication server hosts may be added
to any particular group.
To view the following window, click Security > Access Authentication Control > Authentication Server Group:
Figure 5 - 38. Server Group List tab of the Authentication Server Group window
This window displays the Authentication Server Groups on the Switch. The Switch has four built-in Authentication Server Groups
that cannot be removed but can be modified. To add a new Server Group, enter a name in the Group Name field and then click the
Add button. T o m odify a pa rticular g roup, cl ick t he Edit bu tton (o r th e Edit Ser ver Group tab ), which will t hen display t he
following Edit Server Group tab:
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Description
Lists the configuration applications on the Switch. The user may configure the Login Method
List and Enable Method List for authentication for users utilizing the Console (Command Line
Interface) application, the Telnet application, SSH, and the Web (HTTP) application.
Using the drop-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the Login Method Lists window, in this
section, for more information.
Using the drop-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the Enable Method Lists window, in this
section, for more information
155