xStack
WAC Authenticating State
Users can display the current WAC authentication state and delete WAC authentication state settings.
To view the following window, click Monitoring > WAC Authenticating State:
The following fields and settings can be viewed:
Parameter
Description
From Port/To
Use the drop-down menus to select the desired range of ports and tick the appropriate check
Port
box(es), Authenticated, Authenticating, and Blocked.
MAC Address
Enter the MAC address for the device whose WAC authenticating state will be removed.
Search
Click this button to initiate a search.
Clear
Click this button to delete the WAC authentication state information seleted above.
Refresh
Click this button to refresh the values on this window.
Authenticated
Tick this check box to display all authenticated users for a port.
Authenticating
Tick this check box to display all authenticating users for a port.
Blocked
Tick this check box to display all blocked users for a port.
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7 - 35. WAC Authenticating State window
245