Power Saving Settings - D-Link xStack DGS-3200-10 User Manual

xStack

Power Saving Settings

This window allows the user to implement the Switch's built-in power saving features. When the Power Saving State is Enabled,
a port which has a link down status will be turned off to save power to the Switch. This will not affect the port's capabilities when
the port status is link up. When the Length Detection State is Enabled, the Switch will automatically determine the length of the
cable and adjust the power flow accordingly.
To view the following window, click Configuration > Power Saving Settings:
The following parameter may be configured or viewed:
Parameter Description
Power Saving Power savings is Enabled by default. To disable this feature, select Disabled from the drop-
State down menu.
Length Detection The power saving cable length detection state is Enabled by default. To disable this feature,
State select Disabled from the drop-down menu.
Click Apply to set the password encryption.
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 2 – 30. Power Saving Settings window
30