Table of Contents
Advertisement
Firmware and Configuration Update
Figure 7-41. Firmware and Configuration Update window
To update firmware or change a configuration file, fill in the
requested information above and then click the Apply button.
The information is described as follows:
Software Update Mode & TFTP Server Address:
Software Update Mode Set to either Network or SLIP.
Determines whether the new firmware code should be
obtained through the Ethernet network or through the
console port.
TFTP Server Address The IP address of the TFTP server
where the new firmware code is.
Last TFTP Server Address This read-only field displays
the IP address of the last TFTP server accessed.
170
Stackable NWay Ethernet Switch User's Guide
Web-Based Network Management
Advertisement
Table of Contents
