Figure 6-25. Add/Remove IGMP Entry screen
The above window is used to specify an agent to interface between
IGMP and VLAN. The agents are assigned to a VLAN and allow
IGMP query and report packets to be present on the given VLAN.
Only 12 agents can exist on the switch at any one time.
Items in the above window are described below:
Action Adds/Removes an entry (agent) from the table.
VID The VLAN number that you wish to create an agent for.
Apply Adds the agent to the table.
Go back to the IEEE 802.1q IGMP Configuration menu and choose
Configure IGMP Control Table in order to activate/deactivate the
agents and configure settings for them.
Choose Configure IGMP Control Table from the IEEE 802.1q
IGMP Configuration menu to access the IEEE 802.1Q IGMP
Configuration screen:
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
87