Table of Contents
Advertisement
Console
Figure 7-32. Configure Console window
This window allows you to choose the refresh rate in the
Console Timeout field (15 minutes, 30 minutes, 45 minutes,
60 minutes or Never). Select the protocol for communicating
through the console port, Console or SLIP, in the Serial Port
field. Use SLIP for out-of-band management. If SLIP is being
used, you may also set the Baud Rate in the last field. Click
Apply and then reboot the Switch for console port settings to
take effect.
The default serial port settings are:
Baud Rate=9600
Data Bits=8
Flow Control=X on/X off
158
Stackable NWay Ethernet Switch User's Guide
Web-Based Network Management
Advertisement
Table of Contents
