Stackable NWay Ethernet Switch User's Guide
special VLAN that you designate for SNMP management packets.
Make sure the Switch port that the management station is
connected to has this PVID number and is a static member of this
VLAN.
Configure MAC-based Broadcast Domains
To create MAC-based broadcast domains, simply create the broadcast
domain itself in the Add/Remove MAC-based Broadcast
Domains screen, and then enter MAC addresses to the broadcast
domain in the Add/Remove MAC-based Broadcast Domain
Members screen. Afterwards, restart the Switch and the broadcast
domain will be implemented.
Please note that if the mode is set to MAC-Based Broadcast
Domains, then the Port Lock function is not supported in the Port
Configuration screen and the Lock Address Table function located
on the Configure Filtering and Forwarding table screen is not
available.
Choose Configure MAC-base Broadcast Domains from the
bottom of the screen above to access the MAC-Based Broadcast
Domains Configuration menu:
90
Using the Console Interface