Table of Contents
Advertisement
Stackable NWay Ethernet Switch User's Guide
C
ONFIGURATION
This appendix provides a sample configuration file that can be used
with the Update Firmware and Configuration Files screen in
the console program.
The configuration file is a simple text file that you create. It has two
functions: to point to the location of a file on a TFTP server, and to
set the IP address, subnet mask and default gateway for the Switch.
The file being uploaded can be either new runtime switching
software, or a switch settings file which was previously saved on the
TFTP server using the Save Settings to TFTP Server screen on
the System Utilities menu. The IP address settings defined in the
configuration file will override all other IP settings, even those
defined in the settings file being uploaded. This enables the settings
from one switch to be uploaded to another switch without their IP
settings being the same (and thus coming into conflict).
Commands:
Code_type
you wish to upload to the Switch. Possible Code_types are
, or
RUNTIME
PROM – PROM update file.
RUNTIME – Switching software update file.
Sample Configuration File
– This command tells the Switch the type of file
. This should always be the first setting.
CONFIG
10
S
AMPLE
C
F
ILE
,
PROM
183
Advertisement
Table of Contents
