Table of Contents
Advertisement
Figure 6-33. Ingress Filtering Check screen
This screen allows you to set Ingress filtering for each port to either
Enabled or Disabled. When a packet arrives at the port and Ingress
filtering is Enabled, the port will check the VLAN ID number of the
packet, and its own VIDs. If there is a match, the port will receive
the packet. If the packet doesn't have a VLAN tag or the port is not a
member of the VLAN for which the packet is tagged, the packet will
be discarded.
Note: If a port is a member of a trunk group but is not the
anchor, the items shown in the above table will be read-
only and the values will be the same as those for the
anchor port.
Choose Configure Port VLAN ID to access the second item on the
IEEE 802.1Q VLANs Configuration menu. The following screen
appears:
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
95
Advertisement
Table of Contents
