Table of Contents
Advertisement
4. If you are an old user, type in the Old Password and press
Enter.
5. Type in the New Password you have chosen, and press
Enter. Type in the same new password in the following field to
verify that you have not mistyped it.
6. Determine whether the new user should have Normal User or
Administrator privileges.
7. Choose the APPLY command to let the password change take
effect.
This method can also be used by an Administrator-level user to
change another user's password.
View/Delete User Accounts
Access to the console, whether using the console port or via Telnet, is
controlled using a user name and password. Up to three of these user
names can be defined. The console interface will not let you delete the
current logged-in user, however, in order to prevent accidentally
deleting all of the users with Administrator privilege.
Only users with the Administrator privilege can delete users.
To view a user account:
Choose View/Delete User Accounts from the User Accounts
Management menu. The following screen appears:
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
59
Advertisement
Table of Contents
