Table of Contents
Advertisement
Stackable NWay Ethernet Switch User's Guide
Figure 6-26. IEEE 802.1Q IGMP Configuration screen
This allows you to enable/disable these agents and set aging timers
for them.
Items in the above window are defined as follows:
VLAN ID This is the VID number for the VLAN that has an
agent attached to it which enables IGMP packets to be sent and
received.
Age-out Timer
Switch before this timer has expired, the Switch will become the
IGMP host for this VLAN.
IGMP Status Activates/deactivates the agent on this VLAN.
Configure VLANs & MAC-based Broadcast Domains
The VLANs & MAC-based Broadcast Domains Configuration
menu displays the status of the current mode and allows a user to
restart the Switch in either IEEE 802.1Q VLANs (port-based) mode
or MAC-Based Broadcast Domains mode, or to use neither selection
by choosing NONE. Please note that the Switch can only support
88
If no IGMP query packet has arrived at the
Using the Console Interface
Advertisement
Table of Contents
