Table of Contents Table of Contents English ... 1. Before You Start 2. Hardware Installation ... Technical Specifications ... Troubleshooting ... Version 02.05.2008...
Installation Requirements Computer with Network adapter installed RJ-45 Network Cable The power outlet should be within 1.82 meters (6 feet) of the Switch Make sure that there is proper heat dissipation and adequate ventilation around the Switch Do not place heavy objects on the Switch...
Page 4
Application 16-Port Compact Gigabit Switch (TEG-S16R) Laptop with Gigabit PC Card (TEG-PCBUSR) 10/100Mbps Multi-Port Print Server (TE100-P21) Printers Workstations with PCI Adapter (TEG-PCITXR) Internet Server with Gigabit PCI Adapter 300Mbps Wireless N (TEG-PCITXR) Cable /DSL Modem Gigabit Router (TEW-633GR) 10/100/1000Mbps...
Ethernet port on the TEG-S16R/TEG-S24R. Rack Mount The TEG-S16R/TEG-S24R can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet with other equipment. 1. Attach the mounting brackets to the TEG-S16R/TEG-S24R's front...
After connecting the Switch to a power outlet, the LEDs do not turn Check the connection of the external power adapter to the TEG-S16R/TEG-S24R and the power outlet. Also check that the power outlet is receiving power. When I connect a computer to the Switch's port, I am not getting Gigabit speeds.
Page 9
Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the purchase. Products returned to TRENDnet must be pre- authorized by TRENDnet with RMA number marked on the outside of the package, and...
Page 10
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF TRENDNET’S PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S...
Page 11
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.