Stackable NWay Ethernet Switch User's Guide
The following fields can be set:
Settings on Restart:
Console Timeout This setting for the restart of the console
is 15 mins, 30 mins, 45 mins, 60 mins, or Never.
Serial Port
used for out-of-band (SLIP) management or for console
management, starting from the next time the Switch is
restarted. In this field, you can toggle between SLIP or console
port type settings.
Baud Rate Determines the serial port bit rate that w ill be
used the next time the Switch is restarted. Applies only when
the
serial
port
management; it does not apply when the port is used for the
console port. Available speeds are 2400, 9600, 19,200 and
38,400 bits per second. The default setting in this Switch
version is 9600.
64
Figure 6-9. Console Options screen
Determines whether the serial port should be
is
being
used
for
out-of-band
Using the Console Interface
(SLIP)