Stackable NWay Ethernet Switch User's Guide
STP Custom Settings
To change the parameters on individual ports:
1. Choose Configure Spanning Tree Protocol from the
System Configuration menu.
2. Choose
STP
Spanning Tree Protocol menu. The following screen
appears:
Figure 6-18. STP Custom Settings screen
Items in the above window are described as follows:
STP State Sets the Spanning Tree Protocol on a particular
port to Enabled or Disabled.
Cost Defines the cost for the connection.
Priority Port Priority is a read-write object that can be set
from 0 to 255. This is the priority number of the port. The
higher the port priority, the more chance the bridge has of
becoming the root port. Zero is the highest priority.
78
Custom
Settings
from
the Configure
Using the Console Interface