Table of Contents
Advertisement
The top of the screen displays the current settings for Console
Timeout and Serial Port as well as the Baud Rate,
Character Size, and Stop Bit for Out of Band and Console
settings, respectively.
Configure Switch Stack
The Switch Stack Configuration screen shows various pieces of
information about your Switch, and allows you to set the System
Name, System Location, and System Contact. These settings
can be retrieved from the Switch using SNMP requests, allowing
these settings to be used for network management purposes.
Choose Configure Switch Stack to access the second item o n the
System Configuration menu. The following screen appears:
Figure 6-10. Switch Stack Configuration screen
The fields you can set are:
System Name Corresponds to the SNMP MIB II variable
system.sysName
for administrative purposes. The Switch's fully qualified
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
, and is used to give a name to the Switch
65
Advertisement
Table of Contents
