Table of Contents
Advertisement
Stackable NWay Ethernet Switch User's Guide
Table 6-1. Administrator and Normal User Privileges
After establishing a User Account with Administrator-level
privileges, press Esc. twice. Then choose the Save Changes menu
(see below). Pressing any key will return to the main menu. You are
now ready to operate the Switch.
Save Changes
The Switch has two levels of memory normal RAM and non-volatile
or NV-RAM. Settings need to be changed in all screens by pressing
Ctrl + S. When this is done, the settings will be immediately applied
to the switching software in RAM, and will immediately take effect.
Some settings, though, require you to restart the Switch before they
will take effect. Restarting the Switch will erase all settings in RAM
and reload them from the NV-RAM. Thus, it is necessary to save all
settings to the NV-RAM before restarting the Switch.
In order to retain any modifications made in the current session, it is
necessary to choose Save Changes from the main menu. The
following screen will appear to indicate your new settings have been
processed:
Figure 6-3. Save Changes screen
56
Using the Console Interface
Advertisement
Table of Contents
