Figure 6-45. Port Traffic Statistics Screen - TRENDnet TEG-S224M User Manual

Figure 6-45. Port Traffic Statistics screen

Select the desired device in the Switch field, the desired setting in
the Ports field, and the desired increment setting in the Update
Interval field: 5 sec, 15 sec, 30 sec, 1 min, or Suspend.
The statistic counters displayed are defined as follows:
Speed If the link is up, the speed and duplex status will be
displayed; if the link is down "-" will be displayed.
% Utilization This shows the percentage of available bandwidth
each port is using over the amount of time specified by the update
interval. For example, when a 10 Mbps port is relaying packets at
5 Mbps, the utilization is 50%.
Bytes Recv.
includes local and dropped packets.
Bytes Sent The number of good bytes sent from the respective
port.
Frames Recv. The number of good frames received. This also
includes local and dropped packets.
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
The number of good bytes received. This also
109