2.3.3 Firmware Update
Choose and click command manual, diagram will be shown, and then direct the location of the
file that to be updated, then press " upload ", if success, it will be shown below
Do you want to activate new software?
2.3.4 Config File
Choose and click command manual, diagram will be shown, and then direct the location of the
file that to be backup, give a name, then press " Backup "
Choose and click command manual, diagram will be shown, and then direct the location of the
file that to be restored, then press " Restore " It will show transfer completed if it success.
Software successfully loaded
Configuration File Backup/Restore
Configuration File Backup
Backup
Configuration File Restore
Restore
Yes
No
31