Management - TRENDnet TEG-S224M User Manual

Stackable nway ethernet switch
Hide thumbs Also See for TEG-S224M:
Table of Contents

Advertisement

Stackable NWay Ethernet Switch User's Guide
Data filtering rate eliminates all error packets, runts, etc. at
14,880 pps per port at 100% of wire-speed for 10Mbps speed.
Data filtering rate eliminates all error packets, runts, etc. at
148,800 pps per port at 100% of wire-speed for 100Mbps speed.
Data filtering rate eliminates all error packets, runts, etc. at
1,488,100 pps per port at 100% of wire-speed for 1000Mbps
speed.
12K active MAC address entry table per device with automatic
learning and aging (10 to 9999 seconds).
12 MB packet buffer per device.
Supports Broadcast Storm filtering.
Supports IGMP Multicast snooping.

Management

RS-232 console port for out-of-band network management via a
console terminal or PC.
Spanning Tree Algorithm Protocol for creation of alternative
backup paths and prevention of indefinite network loops.
Fully configurable either in-band or out-of-band control via
SNMP based software.
Flash memory for software upgrade. This can be done in-band
via BOOTP/TFTP. Out-of-band console can also initiate a
download request.
Built-in SNMP management: Bridge MIB (RFC 1493), RMON
MIB (RFC 1757), and MIB-II (RFC 1213).
6
Introduction

Advertisement

Table of Contents
loading

This manual is also suitable for:

Teg-s224sTeg-s224 series

Table of Contents