Table of Contents
Advertisement
Advanced
Figure 7-3. Configure Switch Stack – Advanced window
The first setting allows you to enable or disable port auto-partitioning
by the Port's Auto-Partition Capability on All Ports function.
If you enable auto-partitioning on all ports, when more than 62
collisions occur while a port is transmitting data, the port
automatically stops transmissions. The second setting allows you to
enable or disable the Head of Line (HOL) Blocking Prevention
function, which is designed to prevent forwarding a packet to a
"blocking" port. Click Apply to let your changes take effect.
The information above is described as follows:
Port's Auto-Partition Capability on All Ports This
option offers Enabled or Disabled to decide whether to auto-
partition a selected port and take it offline or not.
Head of Line (HOL) Blocking Prevention This option
prevents forwarding a packet to a port where an excess of
126
Stackable NWay Ethernet Switch User's Guide
Web-Based Network Management
Advertisement
Table of Contents
