Table of Contents
Advertisement
Stackable NWay Ethernet Switch User's Guide
configuration file is explained in detail in the Sample
Configuration File Appendix.
Config File Name The complete path and filename on the
TFTP server for the configuration file to use.
Last TFTP Server Address is a read-only field that displays the
IP address of the last TFTP server to be accessed.
Special Note Concerning Firmware Updates
1. Never download new firmware through a trunked port.
Doing so may result in a failed download, broadcast storm,
or other network problems.
2. Avoid changing active links and do not make new loops on
the network when downloading new firmware.
3. Downloading new firmware may result in the loss of some or
all Switch settings. We therefore strongly recommend
performing a factory reset and then restarting the Switch
after a successful firmware download.
4. Firmware updates are handled by the PROM code, which
doesn't recognize VLAN tags. You should therefore make
sure the Switch port to which the TFTP server is connected
is not a tagging port.
System Utilities
The Utilities menu offers four system utility options, Ping Test,
Save Settings to TFTP Server, Save Switch History to TFTP
Server, and Clear Address Table.
Choose System Utilities on the main menu to access the Utilities
menu seen below:
100
Using the Console Interface
Advertisement
Table of Contents
