Table of Contents
Advertisement
6
U
SING THE
Your
Stackable
management interface that allows you to set up and control your
Switch, either with an ordinary terminal (or terminal emulator), or
over the network using the TCP/IP TELNET protocol. You can use
this facility to perform many basic network management functions.
In addition, the console program will allow you to set up the Switch
for management using an SNMP-based network management
system. This chapter describes how to use the console interface to
access the Switch, change its settings, and monitor its operation.
Connecting to the Switch
You can use the console interface by connecting the Switch to a
VT100-compatible terminal or a computer running an ordinary
terminal emulator program (e.g., the terminal program included with
the Windows operating system) using an RS-232C serial cable. Your
terminal parameters will need to be set to:
VT-100/ANSI compatible
Arrow keys enabled
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
NWay
Ethernet Switch supports a console
C
ONSOLE
I
NTERFACE
6
51
Advertisement
Table of Contents
