Stackable NWay Ethernet Switch User's Guide
Figure 6-33. Default port VLAN assignment screen
This screen allows you to set a Default port VLAN ID number (Vid)
for each port. Press CTRL+S to let the changes take effect.
Note: If a port is a member of a trunk group but is not the
anchor, the items shown in the above table will be read-
only and the values will be the same as those for the
anchor port.
Choose Configure Static VLAN Entry to access the third item on
the IEEE 802.1Q VLANs Configuration menu. The following
screen appears:
96
Using the Console Interface