Omron ZG User Manual page 65

Width direction
Performs measurement taking the point of intersection of the profile and the edge level as an edge.
< Edge position >
Icon
Left
Right
< Edge width >
Icon
Width
Width
Illustration of automatic setting
Enclose the desired
measurement area.
Edge level
(center of region)
How to adjust the region p.66
Note
The edge level can be changed in the EXP mode.
How to change the edge level p.70
ZG User's Manual
Description
Edge position
Edge position
Description
Width
Width
The region and edge level
are automatically set.
→ Check/adjustment
Measures the edge that is
positioned on the left side inside
an area.
Measures the edge that is
positioned on the right side inside
an area.
Measures the width of the
protrusions between edges that
are extracted inside an area.
Measures the width of the
indentations between edges that
are extracted inside an area.
Edge level
Measurement Settings
63