Mounting on a DIN Track
Removing the Controller from the DIN track
2
ZG User's Manual
1
Hook the connector end of the
Controller onto the DIN track.
1
2
Push the Controller down onto
the DIN track until the hook on the
2
I/O cable side is locked.
Important
After mounting the Controller on the
DIN track, attach the end plates on
both sides of the Controller.
1
Pull the hook on the I/O cable end
of the Controller downwards.
2
Lift up the Controller from the I/O
cable end, and remove it from the
DIN track.
1
Mounting and Connecting Devices
End plate
DIN track (sold separately)
PFP-100N (1 m)
PFP-50N (0.5 m)
PFP-100N2 (1 m)
31