Omron ZG User Manual page 81

Note
Averaging is not performed for the data on the right edge because the required number of
samples cannot be obtained.
MEAS/AVERAGE
[ 1]
OK
Setting the smoothing function
Changes in data are smoothed out using the intermediate values of adjacent data.
Smoothing is performed in the "width direction (X-axis direction)." This setting is effective
in filtering noise such as spikes.
MEAS/SMOOTH
[LOW]
OK
FUN mode-[MEAS]-[IMAGE]-[PROFILE]-[SMOOTH]
Setting value
OFF, LOW, MID, HIGH
ZG User's Manual
[64]
OK
MEAS/SMOOTH
[HIGH]
OK
Description
Sets the smoothing strength.
(default value: LOW)
Measurement Settings
79