Setting the Communication Specifications
Change the settings of the controller communication specifications for communicating with
the external device by CompoWay/F protocol.
Use a USB cable or RS-232C cable to connect ZFV-C controllers to external devices.
For the USB cable connection, download and install the USB driver beforehand.
For the USB driver, please contact your OMRON representative.
1.
Switch the controller to [MENU].
2.
Select [System2] - [Communication] to set the appropriate communication
specifications for the external device.
3.
Switch the controller to [RUN]. (This executes the save.)
Setting the Communication Specifications
CompoWay/F Communication Command Reference
Section 1
ZFV-C
1-3