Omron ZG User Manual page 144

Receive Bank Data < BANKSAVE command >
This command receives the bank data from the Controller by XMODEM protocol.
< Command format >
B A N K S A V E
< File transfer >
The file is transferred by XMODEM (-CRC or -SUM) after READY is received.
XMODEM (-K) is not supported.
< Response format >
C R
R E A D Y
When processing ends successfully
C R
O K
When processing fails
C R
E R
< Explanation of parameters >
Bank No.
142
Serial Communication
C R
Bank No.
Specifies the bank No. to receive (acquire) data at. (1 to 16)
ZG User's Manual