Available Commands - Omron ZG User Manual

Available Commands

Bank Control Commands
Command name
BANKSET
BANKGET
Measurement control/measurement value acquisition commands
Command name
MEASURE (or M)
TRIG (or T)
ZERORST
ZEROCLR
Setting acquisition/change commands
Command name
DATAGET
DATASET
DATASAVE
DATAINIT
Backup/restore commands
Command name
BANKLOAD
BANKSAVE
SYSLOAD
SYSSAVE
ZG User's Manual
Description
Switches the current bank.
Acquires the current bank No.
Description
Acquires the current measurement value.
In the trigger measurement mode: Measurement is
executed and the measurement value is acquired.
Issues the measurement trigger.
Executes a zero reset.
Cancels a zero reset.
Description
Acquires the Controller's bank data. The latest judgment
result also can be acquired by this command.
Sets the bank data.
Saves all bank data to the Controller's flash memory.
Returns all Controller setup data (bank data and system
data) to their defaults.
Description
Sends the bank data to the Controller by XMODEM
protocol.
Receives the bank data from the Controller by XMODEM
protocol.
Sends the system data to the Controller by XMODEM
protocol.
Receives the system data from the Controller by XMODEM
protocol.
Reference
p.134
p.135
Reference
p.136
p.137
p.138
p.138
Reference
p.139
p.139
p.140
p.140
Reference
p.141
p.142
p.143
p.144
Serial Communication
133