Omron ZG User Manual page 179

Real-Time Parallel Output Unit
ZG-RPD11/RPD41
(14.15) 13
30
Item
I/O type
Data output system
Data format
Synchronization signal
Judgment output
Measurement output
RS-232C output
Status indicators
Circuit internal power supply
voltage
Current consumption
Insulation resistance
Dielectric strength
Vibration resistance
(durability)
ZG User's Manual
29.60
15.85
66.50
9 80
89
98
(2.85)
70
35.20
ZG-RPD11
NPN type
16-bit parallel open collector output
The measurement value is converted to 16-bit binary data (2's complement)
before it is output (signal names: D0 to D15).
Synchronization signal for notifying data determination timing (signal name:
GATE).
1-bit open collector output
NPN open collector, 30 VDC max.,
20 mA max.,
residual voltage 1.2 or less
1 port, max. 115,200 bps
• PWR indicator (green) → Lights when ZG-RPD is energized.
• ERR indicator (red) → Lights up when an energizing current of 20 mA or
more flows to 1 bit or more of the open collector output (data output: 16 bits,
GATE: 1 bit)
24 VDC and 3.3 VDC. Power is supplied from ZG-WDC_1 via exclusive
connector.
0.5 A max.
Connected to ZG-WDC_1, across all lead wires and controller case of the ZG-
WDC_1: 20 MΩ (by 250 V megger)
Connected to ZG-WDC_1, across all lead wires and controller case of the ZG-
WDC_1: 1000 VAC, 50/60 Hz 1 min
10 to 150 Hz (0.7 mm double amplitude), 80 min each in X, Y, and Z directions
10 28.40
Two mounting holes
15.65
9
(150)
ZG-RPD41
PNP type
PNP open collector, 20 mA max.,
residual voltage 1.2 or less
delay
Specifications and External Dimensions
(Unit: mm)
delay
177