Omron ZG User Manual page 71

Selecting Measurement Points
Any measurement point inside the received light area can be measured. Set this menu
item when measuring small unevenness. The measurement point setting is enabled only
in the EXP mode.
FUN mode-[MEAS]-[SENS]-[TASK1 to 8]-[CUSTOM]-[POINT]-[POINT1 to 2]
Setting value
AVE (average)
PEAK
BTM
ZG User's Manual
MEAS/MGNIFY
1MGNIFY 2RESET
Description
Measures the average value inside the line beam.
Measures the peak position of the line beam.
Measures the bottom position of the line beam.
The profile in the specified area is
displayed magnified.
Average
Peak
Bottom
Measurement Settings
69